In the production of Diamond Flux
soldering flux expensive and high-quality materials are used to achieve characteristics important for soldering. Our initial goal was to develop recipes for the production of high-quality soldering fluxes for the assembly and repair of electronic printed circuit boards, and we successfully completed this task in 1 year. Express 24 company's soldering fluxes comply with electronics industry standards - IPC, which is of great importance when choosing fluxes for soldering.
Express 24 have developed 3 products:
-
Soldering flux paste gel Diamond Flux FN231 in 10g syringe. Suitable for soldering and repairing electronics and printed circuit boards PCBs that have not been subject to severe corrosion. With it, you can change any components, including SMD, BGA, QFN and others, without restrictions. Soldering flux is suitable for work in large and small manufactories. For repairing phones, laptops and other electronics in repair shops. For home soldering and electronics repair.
Soldering flux paste Diamond Flux FN231 have a ROL0 class, which means about zero halides in the solder flux. ROL0 class is important so that after soldering and lack of proper cleaning, your electronics will work without current leakage and oxidation from soldering flux residues. Flux residues FN231 and FN232 are absolutely passive to metals and plastics and do not oxidize them. ROL0 class is a soldering flux with low activity and works great for soldering new printed circuit boards or for repairs PCBs.
-
Liquid soldering flux Diamond Flux FN232 in 10g jar with a brush. Perfect for lovers of liquid flux. They can be used to solder wires, since flux that gets under the insulation will not cause oxidation of copper wires, which is very important. Many liquid fluxes do not meet this requirement and the soldered wires are destroyed over time. Liquid fluxes are used everywhere for repairing electronics and soldering stranded and solid wires.
Liquid Soldering Flux Diamond Flux® FN232 also have a ROL0 class.
-
High Active Soldering Flux paste gel Diamond Flux FA241 in a 10g syringe. For soldering and repairing electronic printed circuit boards and electronics that have been exposed to moisture and water, which has caused oxidation. With it, you can confidently restore pinouts pads on the PCBs for solder any components, including SMD, BGA, QFN. Due to the high activity of the soldering flux, it is necessary to thoroughly clean the printed circuit boards after soldering to avoid the formation of current leaks. Soldering flux is suitable for use in large and small industries. For repairing phones, laptops and other electronics in repair shops. The high activity of the flux is suitable for soldering copper pipes in plumbing.
High Active Soldering flux gel Diamond Flux® FA241 have a ROM1 Class.
It is possible and necessary to wash off the remaining flux for soldering. This can be done using FluxOff PCB manual cleaner or cleaning system in contract manufactury. All soldering fluxes Diamond Flux are easy to clean.
Washing has a number of advantages:
- Aesthetic appearance. A clean PCB is more pleasant to interact with.
- Application of moisture-proof coatings. Excellent adhesion of varnishes and sealants to a printed circuit board can only be achieved in the absence of flux residues.
- Customers will be delighted with your work.
In the box with soldering flux you will find instructions for use. We also periodically publish articles with interesting facts about electronics production, fluxes and soldering processes.
